Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W

Inkbird Tech COMINHKPR111236 - It is with temperature calibration and compressor delay which can protect your refrigeration. 10a, 100v~240v ac buzzer alarm: high and low temperature Alarm Sensor Type: NTC sensor Including Sensor Length: 2m / 6. 56ft input power Cable Length: 1. 5m 5ft output power cable length: 30cm 1ft Body Dimension: 140x68x33mm 5.

5x2. 7x1. 3inch socket dimension: 85x42x24mm 3. 3x1. 7x1inch ambient temperature: -30~75°c / -22~167°f storage temperature: -20~60°c / -4~140°f humidity: 20~85% no condensate warranty: 1 Year Package Included: 1x ITC-308 Temperature Controller 1x Manual X1f947;🥇【convenient design】plug and play, easy to use.

Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W - Maximum output load: 1100W110V. Support °C/°F display. X1f947;🥇【dual relay output】be able to connect with refrigeration and heating equipment at the same time. X1f947;🥇【dual display window】Be able to display measured temperature and set temperature at the same time. X1f947;🥇【buzzer alarm】high and low temperature alarms are available when the temperature is over or the sensor is with issue.

X1f947;🥇【warranty & safe】 warranty: 1 year. Specification: temperature control range: -50~99°C / -58~210°F Temperature Resolution: 0

More information about Inkbird Tech COMINHKPR111236

Fermentation Heater by The Weekend Brewer

The Weekend Brewer COMINHKPR125665 - Perfect for all size fermenters. Keep your fermenting liquid at the exact correct temperature when you pair this heater with a digital temperature controller. At 25" long and 10" tall, this heater will easily fit most beer and wine fermenters. For more control, pair with a digital temperature controller and thermowell.

Fermentation Heater by The Weekend Brewer - 35 watts. Accurate temperature control. Upgraded electrical connections. Carboy, temperature controller, and thermowell NOT included. This flexible heater is perfect for home beer and wine making. Secure it around your carboy or bucket using electrical tape. Now manufactured with clip connections which are safer and will last longer than other heaters on the market.

Even heat. Attach to your preferred fermenter with electrical tape and this heater will provide even heat throughout the entire vessel.

More information about The Weekend Brewer COMINHKPR125665


Similar products



Homebrew #7 Stopper Thermowell

The Weekend Brewer COMINHKPR141218 - Now manufactured with clip connections which are safer and will last longer than other heaters on the market. Accurate temperature control. Use this stopper thermowell to get your temperature controller probe in contact with your beer without risking contamination. The included #7 stopper fits most standard glass carboys.

The stopper has 2 holes, one for the thermowell and one for your airlock. Attach to your preferred fermenter with electrical tape and this heater will provide even heat throughout the entire vessel. Keep your fermenting liquid at the exact correct temperature when you pair this heater with a digital temperature controller.

Homebrew #7 Stopper Thermowell - Perfect temperature control. Use of this thermowell will ensure your wort stays contamination free. Upgraded electrical connections. Airlock hole. Even heat. Ensure the #7 stopper is the correct size for your carboy before purchasing. Perfect for all size fermenters. Fits most glass carboys. At 25" long and 10" tall, this heater will easily fit most beer and wine fermenters.

More information about The Weekend Brewer COMINHKPR141218


Similar products



Bio Green PAL 2.0/US Palma BioGreen Basic Electric Fan Heater for Greenhouses, 2 Year Warrenty

Bio Green PAL 2.0/US - Bio green is a family owned manufacturer for greenhouse heaters since 1984 with a lot of expertise and expirience in the greenhouse heating field. Air circulation in the summer is also necessary for the pollination of many flowers and vegetables. Attach to your preferred fermenter with electrical tape and this heater will provide even heat throughout the entire vessel.

1500 w/ 5118 btu heating output, 2 years. By using the fan setting, all the air in the greenhouse can be circulated even in the summer season. The fan setting. Perfect for all size fermenters. With the window open and the fan on, the greenhouse can be cooled down. Very energy efficient to operate. Floor-standing greenhouse heater, high airciculation fan agains mold formation on plants.

Bio Green PAL 2.0/US Palma BioGreen Basic Electric Fan Heater for Greenhouses, 2 Year Warrenty - Accurate temperature control. Use this stopper thermowell to ensure your temperature controller probe is getting the most accurate reading. Ipx4 splash-proofing ideal for use in humid areas such as hobby greenhouses. Powerful greenhouse heater, compact, energy-efficient High ventilation rate up to 460 m³/h.

Fits most glass carboys.

More information about Bio Green PAL 2.0/US


Similar products



Humidity Controller IHC200 Inkbird Humidistat Mushroom Greenhouse Pre Wired Outlet Dual Stage Humidifier Dehumidifier

Lerway Tech - Humidity Controller IHC200 Inkbird Humidistat Mushroom Greenhouse Pre Wired Outlet Dual Stage Humidifier Dehumidifier - Ihc-200 can control any 100-265 volt humidifier, dehumidifier or fan. 10a, 100v ~240v ac humidity measuring Range : 5%-99. 99%rh humidity control range : 5%-99%rh resolution: 1%rh accuracy: ±3%RH Sensor model: AM-2301 Sensor stability:. Its play-n-plug designed, dual LED screens enabling more humanized. Feature: power input: 100 ~240vac, 50Hz/60Hz Power Output: Max.

Ihc-200 is an easy-to-use, safe and reliable dual relay output humidity controller.

More information about Lerway Tech


Similar products



Onebom Beer Draft Faucet with 3`` Shank Kit & Tap Brush, Connect 3/16`` ID Tubing, Chrome Plated No Leaks for Fridge,Keg 3'' Shank

- Use of this thermowell will ensure your wort stays contamination free. 1500 w/ 5118 btu heating output, 2 years. Switch the modes between humidification and dehumidification automatically;Calibrate the humidity value;. Are you upset of leaking or sticking faucet for your fresh homebrew draft beer? are you still looking for a faucet that is pour perfect with you kegerator or fridge or keezer? OneBom BEER DRAFT FAUCET with Nipple Shank can proudly meet your requirements! It features a forged brass body with a highly polished chrome finish.

Ideal for greenhous, garage, milksheds, workshop. Engineered in Germany. Fits most glass carboys. This chrome faucet has inner stainless steel inserted to make sure it`s Rustproof & Corrosion resistance. You don`t need to worry about your health. Plastic faucet knob- this knob is a twist on and can be interchangeable with personal knobs! Works with all standard 3/8" 16 tap handles.

Onebom Beer Draft Faucet with 3`` Shank Kit & Tap Brush, Connect 3/16`` ID Tubing, Chrome Plated No Leaks for Fridge,Keg 3'' Shank - Works perfect & looks great - perfect seal when tapping a keg. Ensure the #7 stopper is the correct size for your carboy before purchasing. Heats up a greenhouse with an area of 120 sqft easily. The stopper has 2 holes, one for the thermowell and one for your airlock. Heater casing made from Stainless Steel / and paimted steel grills.

More information about


Similar products



Inkbird Digital Pre-Wired Outlet Dual Stage Humidity Controller IHC-200 for Mushroom Ventilator Fan Crawl Space Curing Meat Humidifier Dehumidifier

Inkbird tech IHC-200 - Plug it into wall socket, set your controller with humidification or dehumidification values to your need. All of our products have one year warranty. If you have any problems, please contact us. Feature: power input: 100 ~240vac, 50Hz/60Hz Power Output: Max. It can fit many residential humidifier and dehumidifier.

It is an easy-to-use, safe and reliable dual relay output humidity controller. 10a, 100v ~240v ac humidity measuring Range : 5%-99. 99%rh humidity control range : 5%-99%rh resolution: 1%RH Accuracy: 3%RH Sensor stability:. The maximum electrical load is 10A. It can maintain the humidity between humidification and dehumidification automatically.

Inkbird Digital Pre-Wired Outlet Dual Stage Humidity Controller IHC-200 for Mushroom Ventilator Fan Crawl Space Curing Meat Humidifier Dehumidifier - It is widely used for mushroom, mini greenhouse, snake cage, ventilator fan, turtle enclosure, crawl space, curing chanmber, tobacco cage and so on. In addition, the humidifier and dehumidifier can be programmed separately, too.

More information about Inkbird tech IHC-200


Similar products



Brewing & Fermentation Heat Pad for Homebrew Beer & Wine Fermenting 120VAC 12 or 25 Watt Heating Mat: Safe for Plastic/Glass Carboy & Bucket Fermentors Includes Heater Temperature Strip

Heezy LLC - Switch the modes between humidification and dehumidification automatically;Calibrate the humidity value;. The easiest to use brewing & fermentation heat pad there Is! ✔Gently warms your fermentor 5 to 20 Deg Fahrenheit above ambient room temperature, perfect for Beer, Mead & Winemaking. Flexible and easy to clean heating mat, Includes Stick on LCD Temp Strip ✔Built in temperature regulation it will keep your brew, at the perfect temperature.

Fits most glass carboys. 1500 w/ 5118 btu heating output, 2 years. Ensure the #7 stopper is the correct size for your carboy before purchasing. Heats up a greenhouse with an area of 120 sqft easily. Calibrate the humidity value, delay protection for control output, and query current temperature. X1f4a7;💧【alarm for safe】alarm when humidity exceeds high/low humidity setting value; alarm when sensor error or humidity exceeds limit.

Brewing & Fermentation Heat Pad for Homebrew Beer & Wine Fermenting 120VAC 12 or 25 Watt Heating Mat: Safe for Plastic/Glass Carboy & Bucket Fermentors Includes Heater Temperature Strip - X1f4a7;💧【multipurpose】 widely used for mushroom, ventilator fan, snake cage, turtle enclosure, mini greenhouse, crawl space, tobacco cage, curing chamber, etc. Easy to use - 12" round fits under almost any size Carboy or Bucket Fermentor. Sanitary. No hassle warranty ✔ us patent pending add this to your Cart and Start Making your Fermenting Easier! * Carboy, or bucket not included Perfect for all size fermenters.

Control humidity by setting value and differential value; Delay protection for Control output; Query current temperature;.

More information about Heezy LLC


Similar products



Fluker's Ceramic Heat Emitter for Reptiles 150 Watt

Fluker Labs 26007 - Works perfect & looks great - perfect seal when tapping a keg. Floor-standing greenhouse heater, high airciculation fan agains mold formation on plants. Accurate temperature control. Temperature regulation - Built in thermal control shuts off heater preventing overheating. Use this stopper thermowell to ensure your temperature controller probe is getting the most accurate reading.

Use of this thermowell will ensure your wort stays contamination free. Natural heat - Bottom radiant heating mimics natures normal process in organic fermenting. Designed for use with all Fluker Clamp-Lamps. Now manufactured with clip connections which are safer and will last longer than other heaters on the market.

Fluker's Ceramic Heat Emitter for Reptiles 150 Watt - Fits most glass carboys. 1500 w/ 5118 btu heating output, 2 years. Simply place under your Fermentor and plug in! Ipx4 splash-proofing ideal for use in humid areas such as hobby greenhouses. Very energy efficient to operate. The shank is the perfect length for a standard fridge door. Faucet spout plug - a spout plug is an economical solution for controlling, fruit flies yeast and bacteria buildup when the faucet is not in use.

Perfect for all size fermenters.

More information about Fluker Labs 26007


Similar products



AC Infinity AXIAL 1238, Muffin Fan, 115V 120V AC 120mm x 38mm High Speed, for DIY Cooling Ventilation Exhaust Projects

AC Infinity HS1238A-X - Applications this high speed fan is suitable in applications where maximizing airflow is the primary objective and a louder noise level is tolerable. Impedance protected motors contains windings that have a higher resistance to heat during a rotor lock. Humidity measuring range: 5~99. 99%rh; humidity control range: 5~99%RH; Accuracy: ±3%RH.

Upgraded electrical connections. The perfect 24-hour heat source for your tropical or desert reptile. Includes a 4 foot power cord that can be easily attached to the fan's metal terminals and allows it to be powered through a wall outlet. Attach to your preferred fermenter with electrical tape and this heater will provide even heat throughout the entire vessel.

AC Infinity AXIAL 1238, Muffin Fan, 115V 120V AC 120mm x 38mm High Speed, for DIY Cooling Ventilation Exhaust Projects - Simply place under your Fermentor and plug in! Use of this thermowell will ensure your wort stays contamination free. Calibrate the humidity value, delay protection for control output, and query current temperature. X1f4a7;💧【alarm for safe】alarm when humidity exceeds high/low humidity setting value; alarm when sensor error or humidity exceeds limit.

X1f4a7;💧【multipurpose】 widely used for mushroom, crawl space, mini greenhouse, snake cage, ventilator fan, curing chamber, tobacco cage, turtle enclosure, etc. Easy to use - 12" round fits under almost any size Carboy or Bucket Fermentor. The stopper has 2 holes, one for the thermowell and one for your airlock.

More information about AC Infinity HS1238A-X


Similar products



YaeBrew Beer Faucet and 4-Inch Shank Kit with Black Handle

Yaemart Corportation KOO-KI-0022 - Keep your fermenting liquid at the exact correct temperature when you pair this heater with a digital temperature controller. Perfect temperature control. Chrome plated brass construction. Heater casing made from Stainless Steel / and paimted steel grills. Works perfect & looks great - perfect seal when tapping a keg.

Natural heat - Bottom radiant heating mimics natures normal process in organic fermenting. Standard threading compatible with most branded tap handles. Ideal for greenhous, garage, milksheds, workshop. Engineered in Germany. Besides, it makes easily to clean the tap with this little smart item. 90 day guarantee - click the "add to cart" button and buy with no regrets.

YaeBrew Beer Faucet and 4-Inch Shank Kit with Black Handle - Floor-standing greenhouse heater, high airciculation fan agains mold formation on plants. No wrap - no wrapping, no tape or Belts. Accurate temperature control. Use this stopper thermowell to ensure your temperature controller probe is getting the most accurate reading. Faucet and shank made of chrome plated brass Perfect for all size fermenters.

Including Faucet knob.

More information about Yaemart Corportation KOO-KI-0022


Similar products